Low profile slim
guide.
Lower profile SBI block geometry for restricted installation height.
VIEW 16 MODEL DIMENSIONS ↓
Dimensions & drawings.
Search models, compare dimensions and open the linked drawings. Technical reference ↗
16 DRAWINGS LINKED
| Model | Download | Mounting dimension | Block dimensions | Rail dimension | Basic load rating (kN) | Permissible static moment (kN•m) | Mass | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| H | W | L | E | Mounting tap hole | L1 | T±1 | K | Grease fitting | W1 | W2 | H1 | F | Bolt hole | G | Max length of rail LO | |||||||||||||||||||
| B | J | M | DP | T1 | N1 | T2 | N2 | Q1 | *Q2 | d | D | h | C | Co | Mro | Mpo | Myo | Block (kg) | Rail (kg/m) | |||||||||||||||
| SBI15 HLS | DRAWING ↗ | 24 | 34 | 56.8 | 3 | 26 | 26 | M4 | 4 | 38.2 | 6 | 21 | 4.5 | 5.5 | 3.8 | 3.8 | M4x0.7 | ø3.5 | 15 | 9.5 | 13 | 60 | 4.5 | 7.5 | 5.5 | 20 | 3000 | 12.3 | 18.3 | 0.13 | 0.08 | 0.08 | 0.15 | 1.3 |
| SBI15 HL | DRAWING ↗ | 24 | 34 | 63.8 | 3 | 26 | 26 | M4 | 4 | 45.2 | 6 | 21 | 4.5 | 5.5 | 3.8 | 3.8 | M4x0.7 | ø3.5 | 15 | 9.5 | 13 | 60 | 4.5 | 7.5 | 5.5 | 20 | 3000 | 14.1 | 24.1 | 0.16 | 0.17 | 0.17 | 0.18 | 1.3 |
| SBI15 HLL | DRAWING ↗ | 24 | 34 | 79.4 | 3 | 26 | 34 | M4 | 4 | 60.8 | 6 | 21 | 4.5 | 5.5 | 3.8 | 3.8 | M4x0.7 | ø3.5 | 15 | 9.5 | 13 | 60 | 4.5 | 7.5 | 5.5 | 20 | 3000 | 17.1 | 31.7 | 0.21 | 0.29 | 0.29 | 0.24 | 1.3 |
| SBI25 HLS | DRAWING ↗ | 36 | 48 | 83 | 5.5 | 35 | 35 | M6 | 6 | 61 | 12 | 30.5 | 6 | 12 | 5 | 5.5 | M6x0.75 | ø3.5 | 23 | 12.5 | 20 | 60 | 7 | 11 | 9 | 20 | 4000 | 28.9 | 42.8 | 0.49 | 0.32 | 0.32 | 0.47 | 3 |
| SBI25 HL | DRAWING ↗ | 36 | 48 | 92 | 5.5 | 35 | 35 | M6 | 6 | 70 | 12 | 30.5 | 6 | 12 | 5 | 5.5 | M6x0.75 | ø3.5 | 23 | 12.5 | 20 | 60 | 7 | 11 | 9 | 20 | 4000 | 31.5 | 52.1 | 0.56 | 0.56 | 0.56 | 0.57 | 3 |
| SBI25 HLL | DRAWING ↗ | 36 | 48 | 108 | 5.5 | 35 | 50 | M6 | 6 | 86 | 12 | 30.5 | 6 | 12 | 5 | 5.5 | M6x0.75 | ø3.5 | 23 | 12.5 | 20 | 60 | 7 | 11 | 9 | 20 | 4000 | 36.7 | 64.4 | 0.69 | 0.84 | 0.84 | 0.7 | 3 |
| SBI30 HLS | DRAWING ↗ | 42 | 60 | 96.8 | 7 | 40 | 40 | M8 | 8 | 68.8 | 12 | 35 | 8.5 | 12 | 7.8 | 5 | M6x0.75 | ø5.7 | 28 | 16 | 23 | 80 | 9 | 14 | 12 | 20 | 4000 | 39.2 | 57.7 | 0.8 | 0.49 | 0.49 | 0.8 | 4.25 |
| SBI30 HL | DRAWING ↗ | 42 | 60 | 107.6 | 7 | 40 | 40 | M8 | 8 | 79.6 | 12 | 35 | 8.5 | 12 | 7.8 | 5 | M6x0.75 | ø5.7 | 28 | 16 | 23 | 80 | 9 | 14 | 12 | 20 | 4000 | 42.8 | 65.4 | 0.85 | 0.77 | 0.77 | 0.95 | 4.25 |
| SBI30 HLL | DRAWING ↗ | 42 | 60 | 131.6 | 7 | 40 | 60 | M8 | 8 | 103.6 | 12 | 35 | 8.5 | 12 | 7.8 | 5 | M6x0.75 | ø5.7 | 28 | 16 | 23 | 80 | 9 | 14 | 12 | 20 | 4000 | 51.3 | 84.7 | 1.1 | 1.3 | 1.3 | 1.22 | 4.25 |
| SBI35 HLS | DRAWING ↗ | 48 | 70 | 108.2 | 8 | 50 | 50 | M8 | 8 | 78.2 | 15 | 40.5 | 8 | 12 | 8 | 6 | M6x0.75 | ø5.7 | 34 | 18 | 26 | 80 | 9 | 14 | 12 | 20 | 4000 | 52 | 73.3 | 1.24 | 0.71 | 0.71 | 1.35 | 6.02 |
| SBI35 HL | DRAWING ↗ | 48 | 70 | 124.6 | 7.5 | 50 | 50 | M8 | 8 | 94.6 | 15 | 40.5 | 8 | 12 | 8 | 6 | M6x0.75 | ø5.7 | 34 | 18 | 26 | 80 | 9 | 14 | 12 | 20 | 4000 | 59.5 | 89.1 | 1.42 | 1.28 | 1.28 | 1.87 | 6.02 |
| SBI35 HLL | DRAWING ↗ | 48 | 70 | 152.6 | 7.5 | 50 | 72 | M8 | 8 | 122.6 | 15 | 40.5 | 8 | 12 | 8 | 6 | M6x0.75 | ø5.7 | 34 | 18 | 26 | 80 | 9 | 14 | 12 | 20 | 4000 | 71.3 | 115.3 | 1.83 | 2.12 | 2.12 | 2.04 | 6.02 |
| SBI45 HL | DRAWING ↗ | 60 | 86 | 142 | 9 | 60 | 60 | M10 | 10 | 108 | 17 | 51 | 10.5 | 13.5 | 9.3 | 6.5 | PT1/8 | ø5.7 | 45 | 20.5 | 32 | 105 | 14 | 20 | 17 | 22.5 | 4000 | 79.2 | 116.3 | 2.48 | 1.9 | 1.9 | 2.8 | 9.77 |
| SBI45 HLL | DRAWING ↗ | 60 | 86 | 174 | 9 | 60 | 80 | M10 | 10 | 140 | 17 | 51 | 10.5 | 13.5 | 9.3 | 6.5 | PT1/8 | ø5.7 | 45 | 20.5 | 32 | 105 | 14 | 20 | 17 | 22.5 | 4000 | 94.8 | 150.5 | 3.21 | 3.14 | 3.14 | 3.29 | 9.77 |
| SBI55 HL | DRAWING ↗ | 70 | 100 | 172.4 | 12 | 75 | 75 | M12 | 12 | 131 | 21 | 58 | 12 | 13 | 12 | 8 | PT1/8 | ø8.7 | 53 | 23.5 | 38 | 120 | 16 | 23 | 20 | 30 | 4000 | 127.3 | 181.8 | 4.81 | 2.97 | 2.97 | 4.42 | 13.72 |
| SBI55 HLL | DRAWING ↗ | 70 | 100 | 211.8 | 12 | 75 | 95 | M12 | 12 | 170.4 | 21 | 58 | 12 | 13 | 12 | 8 | PT1/8 | ø8.7 | 53 | 23.5 | 38 | 120 | 16 | 23 | 20 | 30 | 4000 | 147.9 | 224.5 | 5.95 | 4.78 | 4.78 | 5.82 | 13.72 |
Check the
exact model.
Series names are a starting point. The model row and drawing govern dimensional fit; confirm options and availability for the final ordering code.
| Series | SBI-HLS / HL / HLL |
|---|---|
| Format | Low profile slim guide |
| Size / model reference | See official model table |
| Load positioning | See model table |
| Accuracy grade | Confirm against SBC order code |
| Preload | Confirm against SBC order code |
| Typical application | Compact automation and low-clearance machine axes |
| Technical reference | Open product data ↗ |
Before you specify.
Lower profile SBI block geometry for restricted installation height. Published dimensions and ratings vary by model, so check the exact row against the machine envelope and duty cycle.
For a new axis, share the moving mass, load direction, travel, mounting orientation and target speed. For a replacement, send the existing part code and assembly drawing. We can review the relevant SBC configuration and quote the required quantity.
Delhi NCR same-day delivery is offered after the item, order time and destination are confirmed. We can arrange pan-India dispatch after the specification and quantity are checked.
Questions buyers ask
Where can I find SBI-HLS / HL / HLL dimensions?
The model table is above. Filter by code or scroll to compare every column.
Is an SBC drawing available for SBI-HLS / HL / HLL?
Use the DRAWING link beside a model where SBC publishes one. Some tables have no individual drawing links.
Which size should I choose?
Selection depends on the actual load, travel, mounting, speed and environment. Send your application or existing drawing for a model review.
Can I order one unit?
Yes. We handle retail enquiries and wholesale orders. Availability and delivery are confirmed before quoting.